|
Wonsun Machinery & Electrical Technology Co. Ltd
|
Gold Index: 12593
Parking Lot Access Control Parking Barrier Gate With CE Approved
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Remote Control CE Approved Parking Barrier Gate For Access Control System
Features
Remote Control CE Approved Parking Barrier Gate For Access Control System
Features
1) The humanized clutch device:in case of power off, unlock the clutch device and raise the boom manufally. By the time the power is supplied, lick the clutch device to make it working normally again.
2) Special spring device:Both the compression spring and tension spring can be used in the machine, Using the compression sprin can avoid accidents caused by the tension spring.
3) Three control buttons:for boom raising, falling and pausing.
4) Boom backtrack function:the boom will rise if hits something when falling.
5) Infrared photocell design:for avoiding the crash when the boom falling, so as to prevent the vehicles from being pressed.
6) Both external and internal loop detectors are supported.
7) "open","close" and "stop" controlling interfaces.
8) RS-485 communication serial interface(optional)
9) Traffic light signal connection device: red light for stop,green light for pass.
10) Remote control and wire control for selection.
Specifications
| Material | Cold roll plate,galvanized plate or stainless steel |
| Housing size | 320*280*935 |
| Protection degree | IP54 |
| Power | 120w |
| Voltage | 220V ± 10%, 110V ± 10% |
| Relative humidity | <90% coagulation free |
| Remote control distance | >30m |
| Working temperature | -45°C to 75°C |
| Motor rotational speed | 1400rmp |
| Max boom length | 8m |
| MCBF | ≥5, 000, 000 times |
| Net weight | 60kg |
| Related accessories | Infrared sensor,loop detector,traffic light,UFH reader |
| Applications | Parking Lots, Toll Gates, Goods Yards, Railway Crossings |
| Applications | Commercial Premises, Aparment Block |
Communication with customers
1) Q: Connected power and press open/close button but traffic barrier gate no action?
|
A |
Reason |
Solution |
|
1 |
Fuse blown |
Check fuse and power in controller |
|
2 |
Battery of remote control powered off |
Change a new one |
|
3 |
External protection circuit break or at protecting status |
Open the barrier door and click OPEN/CLOSE button on control box |
|
4 |
Same frequency interference |
Check photocell and loop detector |
2) Q:Connected power and press open/close button,traffic barrier gate will move but even when it is at right position, the motor still running and not stop?
|
A |
Reason |
Solution |
|
1 |
Limit switch |
Adjust the horizontal/vertical limit switch to correct position |
|
2 |
Main controller failure |
Change a new one |
3) Q: Motor running but traffic barrier gate arm no action?
|
A |
Reason |
Solution |
|
1 |
Barrier arm at 45° position where is hard to move |
Unlock clutch and manually rotate arm to horizontal or vertical position then try again |
|
Wonsun Machinery & Electrical Technology Co. Ltd [China (Mainland)]
Business Type:Manufacturer |
